CHARGING
1. Insert hearing amplifier vertically as shown.
2. Lay hearing amplifier down as shown by pushing towards the charging case cover.
3. Close the lid of the charging case until it clips into place.
Please note if the hearing amplifier doesn's sit perfectly in the charging case it will not charge.
Charging by Battery
1. Insert a AA battery in the compartment.
2. Please check that two lamps are GREEN after you push the Status Button.
3. Please charge it for 7 hours at least
Charging by AC Adapter
1. Connect the AC Adapter.
2. Please check that two lamps are GREEN after you push the Status Button.
3. Please charge it for 7 hours at least.
CHARGE STATUS
OPERATING INSTRUCTION
1. Turn on the hearing amplifier before putting it into your ear.
2. The power will be on when you turn the dial to the highest volume, whereas the power will be off after you turn the dial to the smallest volume (Please turn it off if you have finished using it.)
3. Please use your finger to grasp the microphone and block the.
You will hear the buzzer ringing if you put into your ear without holding the microphone
MAINTENANCE METHOD
1. Please clean your ear before use. If the inner ear is blocked with ear wax, then sound quality will be reduced.
2. Please clean out any earwax in the hearing amplifier. Earwax can most often congregate around the sound tip as show below
TROUBLE SHOOTING
1. Is power on?
Turn on the power switch.
2. Is the ear cap blocked with wax or debris?
Clean the ear cap using the cleaning brush provided.
3. Is the battery dead?
Place the hearing amplifier in the charging case, and ensure it is charging by battery or AC adapter.
Persons suffering from loss of hearing should have a medical evaluation for diseases of the ear periodically after using hearing amplifiers.